How to Uninstall Raw Accel - Complete Removal Guide (2026)

Raw Accel is a popular mouse acceleration tool, but there are times when you may need to remove it from your system. Whether you are switching to a different setup, troubleshooting issues, or simply no longer need it, proper removal is important.

Since Raw Accel uses a system-level driver, simply deleting the folder is not enough. This guide covers every method for completely uninstalling Raw Accel, including removing the driver, cleaning up leftover files, and resetting your mouse settings.

Before You Uninstall

Before removing Raw Accel from your system, follow these preparation steps to ensure a clean uninstallation:

Open Raw Accel and disable acceleration by turning off the acceleration toggle.
Click Apply to save the disabled state.
Close the application completely. Check the system tray (bottom-right of your taskbar) to make sure it is not running in the background.
Restart your PC. This ensures the driver is not actively loaded when you attempt to remove it.
Make sure you are using an administrator account. You need admin privileges to remove the driver.

Method 1: Built-In Uninstaller

The easiest way to remove Raw Accel is by using its built-in uninstaller, if one is available in your version.

Using the Uninstaller File

Navigate to the folder where you installed Raw Accel.
Look for a file named uninstall.exe or similar.
Right-click it and select Run as Administrator.
Follow the on-screen prompts to complete the removal.
Restart your computer after the uninstaller finishes.

Using Control Panel

Open Control Panel and go to Programs and Features (or Apps & Features in Windows Settings).
Find Raw Accel in the list of installed programs.
Click Uninstall and follow the prompts.
Restart your computer after the process completes.

Note: If Raw Accel does not appear in Control Panel, or the uninstaller does not fully remove the driver, proceed to Method 2 for manual removal.

Method 2: Manual Removal (Recommended)

Manual removal gives you the most control and ensures that all components, including the driver, are completely removed from your system.

1

Close Raw Accel Completely

Make sure Raw Accel is not running anywhere on your system:

Check the system tray (bottom-right corner of your taskbar) for the Raw Accel icon. If present, right-click and select Exit or Close.
Open Task Manager (press Ctrl + Shift + Esc) and look for any Raw Accel processes. If found, right-click and select End Task.

2

Delete the Raw Accel Folder

Navigate to the folder where Raw Accel was installed or extracted. This is typically the folder you created when you first set up the software. Delete the entire folder and all its contents.

If Windows says a file is in use and cannot be deleted, restart your computer and try again before the application loads.

3

Remove the Driver via Device Manager

This is the most important step. The Raw Accel driver must be removed from Device Manager:

Press Win + X and select Device Manager.
Look through the device categories for the Raw Accel driver. It may appear under Mice and other pointing devices, Human Interface Devices, or a similar category.
Right-click on the Raw Accel driver entry.
Select Uninstall device.
Important: Check the box that says "Delete the driver software for this device" (or "Attempt to remove the driver for this device" on Windows 11).
Click Uninstall to confirm.

Restart your computer immediately after removing the driver. This is required for the driver to be fully unloaded from the system.

Method 3: Command Prompt (Advanced)

This method is for advanced users who are comfortable working with the Windows command line. If you are not sure about these commands, use Method 2 instead.

Open Command Prompt as Administrator: press Win + X and select Command Prompt (Admin) or Windows Terminal (Admin).
Use driver management commands to identify and remove the Raw Accel driver. The specific commands may vary depending on your Raw Accel version.
Common commands include using pnputil to enumerate and delete drivers, or sc to stop and delete driver services.

Important: Only use this method if you know what you are doing. Incorrectly removing drivers via command line can cause system instability. Restart your computer immediately after removing the driver.

Reset Windows Mouse Settings

After uninstalling Raw Accel, you should check your Windows mouse settings to make sure everything is configured correctly:

Open Settings and go to Devices, then Mouse.
Click Additional mouse options.
Go to the Pointer Options tab.
Check or uncheck "Enhance pointer precision" based on your preference. If you disabled this for Raw Accel and want it back, re-enable it now.
Confirm that the pointer speed slider is set to the middle position (default).
Click Apply and OK.

Also confirm that your mouse DPI is set to your preferred value in your mouse software (Logitech G HUB, Razer Synapse, Corsair iCUE, etc.).

Check For Leftover Files

After uninstalling, it is a good idea to check for any remaining files or startup entries:

Task Manager Startup Tab

Open Task Manager (Ctrl + Shift + Esc).
Go to the Startup tab.
Look for any Raw Accel entries. If found, right-click and select Disable.

AppData and ProgramData Folders

Open File Explorer and navigate to %AppData% (type this in the address bar and press Enter).
Look for any Raw Accel folders and delete them if found.
Also check %LocalAppData% and %ProgramData% for any remaining files.

These leftover files are harmless but removing them ensures a completely clean uninstallation.

Mouse Feels Strange After Uninstalling?

If your mouse feels different after removing Raw Accel, do not worry. This is normal and usually not a technical issue. Here is what might be happening:

Muscle memory adjustment: Your brain adapted to the acceleration curve. Without it, your mouse movements feel different even though they are technically back to normal. This fades within a few days.
Driver not fully removed: If the driver was not properly uninstalled, it may still be intercepting input. Go back to Device Manager and verify the driver is gone, then restart.
Windows settings changed: Double-check your "Enhance pointer precision" setting and pointer speed slider. Make sure they are set the way you want them.
Give it time: It typically takes one to three days for your muscle memory to readjust after removing acceleration. Be patient.

Is It Safe to Uninstall Raw Accel?

Yes, it is completely safe to uninstall Raw Accel. Removing the software will not damage your system, your mouse, or any other hardware. Your mouse will simply return to its default behavior without any acceleration applied.

The uninstallation process removes the driver and application files. It does not affect your Windows installation, game files, or other software.

Uninstalling Because Raw Accel Is Not Working?

If you are considering uninstalling because Raw Accel is not functioning properly, you may want to try troubleshooting first. Many common issues can be fixed without a full uninstall.

Check our dedicated troubleshooting guide: Why Is My Raw Accel Not Working?

If you do uninstall and later decide to reinstall, follow our step-by-step guide: How to Install Raw Accel.

Conclusion

Uninstalling Raw Accel is a simple process as long as you follow the proper steps. The key points to remember are: disable acceleration first, close the application completely, delete the folder, remove the driver through Device Manager, restart your computer, and check your mouse settings afterward.

Whether you are cleaning up your system, switching setups, or troubleshooting, a clean uninstall ensures your mouse returns to its default behavior without any leftover interference.

Guides

How to Install Raw Accel

Step-by-step installation guide for getting Raw Accel set up on your Windows PC.

How to Use Raw Accel

A beginner-friendly guide to configuring Raw Accel from opening the app to finding your perfect settings.

Why Is My Raw Accel Not Working?

Troubleshoot common Raw Accel issues including driver problems, settings not saving, and cursor jitter.